Чжэцзян Минли Машинотехника Технолоджи Ко., Лтд.
How long a bag making machine stays accurate and reliable depends less on its condition on the day it arrives and more on how it is looked after every shift. This guide gives you a maintenance checklist organized by frequency, which you can print and use on the line. The items below reflect common practice for bag making equipment. Your own machine manual always takes priority on intervals and procedures.
Three things improve when maintenance is routine. Seal quality stays consistent from shift to shift. Unplanned stops become rarer, because worn parts are replaced before they fail. And precision components such as sensors and servo drives last longer when they are kept clean and correctly set. Many of the problems covered in our guide to common bag making machine problems can be avoided this way.
A modern bag making machine combines mechanical, electrical, and pneumatic parts, controlled by a PLC. On top of that sit functional modules: film unwinding with tension control, sealing, cutting, vacuum handling, and on some lines vision or robotic accessories. The checklist below covers each of them.
| Frequency | What to Check |
| Every shift | Clean the seal area Inspect sealing elements and heat-resistant covers Wipe sensor lenses Check that the film path and rollers are clean Confirm emergency stop and alarms work Record the parameters used Spot-check seal strength |
| Weekly | Check feed and pulling rollers for wear Check unwind tension control and braking Check cutting blades Clean vacuum suction ports Check belts, chains, and fasteners |
| Monthly | Lubricate as the manual specifies Check electrical connections and keep the control cabinet clean and ventilated Check air filters and look for leaks in air lines Verify sensor settings Back up recipes and parameters |
| Periodic (per manual) | Replace wear parts on schedule Inspect motors, servo drives, and bearings Verify heating temperature accuracy Review alarm history for repeating patterns Arrange a full inspection with your supplier |
Adjust frequency to your machine model and how hard it runs.
If your line uses a CCD valve adding robot, a folding robot, or an intelligent sealing machine, add them to the routine. Keep vision lenses clean, check positioning references, and inspect moving parts and sealing elements, following each unit's own manual. Our guide to intelligent robot accessories explains what each one does.
Waiting for a part is what turns a small repair into a long stop. Keep spares of these categories on hand:
Sealing elements and heat-resistant layers
Cutting blades
Rollers and belts
Sensors
Filters and fuses
Ask your supplier for a recommended spare parts list when you order, as covered in our supplier checklist.
Record the date, who did the work, what was done, which parts were replaced, any parameter changes, and any alarms. Stored recipes keep settings consistent, and a log makes problems traceable. Together they reduce differences between shifts.
Maintenance is part of the real cost of a machine, so ask before you order:
Is a maintenance manual and recommended spare parts list provided?
Is operator or maintenance training available?
What remote support is offered, and how quickly does the supplier respond?
These answers belong in your total cost of ownership, which our bag making machine cost guide explains in more detail.
Mingli's machines run on PLC control with a touch screen that shows key parameters in one place, and recipe storage that keeps settings repeatable. An automatic alarm device and film breakage detection help catch abnormalities early. These features support good maintenance habits. They do not replace routine upkeep.
Want to build a maintenance routine for your line? Send us your machine model, the film you run, and how many shifts per day, and our team will help you decide where to focus.
Get in Touch
